Mondraker
Mondraker Zendit RR
Colour: Black
Size
Choose a size to check stock
Mondraker Zendit RR: Enduro e-MTB e-bike at official UK RRP. Order through Single Track Racing, Kirkcaldy — built, set up and supported by our workshop.
- ✓Stealth Air full-carbon frame with Forward Geometry
- ✓170mm Fox 38 Factory fork and 165mm rear travel with Fox Float X Factory shock
- ✓Avinox M2S motor delivering 130Nm torque, rising to 150Nm in Boost Mode
- ✓Integrated 800Wh battery with Avinox 4A charger
Carbon enduro e-MTB with Avinox power and 165mm ZERO suspension.
- ●Stealth Air full-carbon frame with Forward Geometry
- ●170mm Fox 38 Factory fork and 165mm rear travel with Fox Float X Factory shock
- ●Avinox M2S motor delivering 130Nm torque, rising to 150Nm in Boost Mode
- ●Integrated 800Wh battery with Avinox 4A charger
- ●Mixed-wheel setup with a flip-chip option for 29-inch wheels
- ●SRAM Eagle AXS T-Type shifting and Maven Base four-piston brakes
Stealth Air Carbon frame
The Zendit frame was developed specifically around the Avinox M2S drive system rather than adapted from an existing platform. Its full-carbon construction uses six-axis CNC machining for frame drilling and finishing instead of hand finishing.
Sealed suspension bearings
The pivot system draws on Mondraker Factory Racing development and uses the same approach as the Summum downhill frame. Single-size Enduro Max bearings simplify maintenance, while two additional rubber seals help extend bearing life.
Revised ZERO suspension
The 165mm ZERO suspension has revised kinematics to provide more support and a more active response under the Avinox motor's power. Mondraker and Fox developed a specific Float X shock tune for the bike. A 36-tooth chainring and optimised anti-squat help balance drivetrain durability with pedalling efficiency.
Kinematics in numbers
The suspension delivers 27% progression with a 205x65mm shock, suited to larger-volume air shocks. Anti-squat is approximately 105% at sag, while approximately 99% anti-rise at sag helps maintain rear-wheel traction with minimal braking influence on the suspension.
Proportional sizing and wheel options
The standard mixed-wheel setup is paired with 450mm chainstays on S, M and M/L frames, increasing to 455mm on L and XL frames. Adjusted pivot placement maintains the same leverage ratio across sizes. A lower flip-chip allows 29-inch wheels by adding 7mm to chainstay length without changing suspension kinematics, bottom bracket height or key angles.
Avinox M2S drive system
The M2S motor supplies 130Nm of torque, increasing to 150Nm in Boost Mode, with 1300W peak power and an 800% assistance level. The compact drive unit weighs 2.65kg and measures 107mm high by 172mm long.
Integrated 800Wh battery
The integrated 800Wh battery weighs approximately 3.77kg. Self-discharge, State Of Health management and voltage reduction help maximise battery life, with 80% capacity retained after 500 charge cycles.