Mondraker
Mondraker Zendit RR Vortex Grey S
In stock — only 1 left
Mondraker Zendit RR Vortex Grey S. Zendit Stealth Air full Carbon, Updated Zero Suspension System, 165mm travel, Forward Geometry, internal battery, Boost
- ✓Stealth Air full-carbon frame with updated ZERO suspension and Forward Geometry
- ✓170mm Fox 38 Factory Kashima fork and Fox Float X Factory Kashima rear shock
- ✓Avinox M2S motor delivering 130Nm torque, rising to 150Nm in Boost Mode
- ✓Integrated 800Wh battery with Avinox 4A charger
Full-carbon enduro e-MTB with Avinox power and 165mm of ZERO suspension travel.
- ●Stealth Air full-carbon frame with updated ZERO suspension and Forward Geometry
- ●170mm Fox 38 Factory Kashima fork and Fox Float X Factory Kashima rear shock
- ●Avinox M2S motor delivering 130Nm torque, rising to 150Nm in Boost Mode
- ●Integrated 800Wh battery with Avinox 4A charger
- ●Mixed-wheel setup with an option to run 29-inch wheels
- ●SRAM Eagle AXS T-Type 12-speed drivetrain and Maven Base four-piston brakes
Stealth Air Carbon frame
The full-carbon frame was designed around the Avinox M2S drive system rather than adapted from an existing platform. Six-axis CNC machines handle frame drilling and finishing in place of hand finishing.
Sealed pivot bearings
The pivot system draws on Mondraker Factory Racing development and shares its approach with the Summum downhill frame. Single-size Enduro Max bearings simplify maintenance, while two additional rubber seals help extend bearing life.
Updated ZERO suspension
Revised suspension kinematics provide greater support and a more active response to suit the motor's output. Mondraker and Fox developed a specific Float X shock tune for the ZENDIT RR, while a 36-tooth chainring supports drivetrain durability.
Progressive suspension kinematics
The suspension offers 27% progression with a 205x65mm rear shock, suited to larger-volume air shocks. Anti-squat is approximately 105% at sag, while approximately 99% anti-rise at sag helps maintain rear-wheel traction with minimal braking influence on suspension.
Proportional sizing and wheel choice
The standard mixed-wheel layout is paired with 450mm chainstays on S, M and M/L frames, increasing to 455mm on L and XL. Adjusted pivot positions preserve the same leverage ratio across sizes. A lower flip-chip allows 29-inch wheels by adding 7mm to chainstay length without changing suspension kinematics, bottom bracket height or key angles.
Avinox M2S drive system
The M2S delivers 130Nm of torque, increasing to 150Nm in Boost Mode, with 1300w peak power and 800% assistance. Its compact unit weighs 2.65kg and measures 107mm high by 172mm long.
Integrated 800Wh battery
The integrated battery weighs approximately 3.77kg and uses self-discharge, State Of Health management and voltage reduction to maximise battery life. It retains 80% of its capacity after 500 charge cycles.